All you need... (Enlarge) |
From your electronics-lab you need...
| 1 | Breadboard |
| 1 | 9V Block Battery |
| 1 | Batteryclip 9V |
| 1 | Set of Jumpers |
These electronic components you need...
| 3 | Pushbutton Switches |
| 2 | LEDs 5mm green and red |
| 3 | Resistors 1 MΩ (brown, black, green), 1/4W |
| 2 | Resistors 470 Ω (yellow, purple, brown), 1/4W |
| 1 | C-MOS IC4001 DIP (4 NOR gates) |
| 1 | C-MOS IC4011 DIP (4 NAND gates) |
| 1 | C-MOS IC4069 DIP (6 NOT gates) |
| 1 | C-MOS IC4070 DIP (4 XOR gates) |
| 1 | C-MOS IC4071 DIP (4 OR gates) |
| 1 | C-MOS IC4077 DIP (4 XNOR gates) |
| 1 | C-MOS IC4081 DIP (4 AND gates) |
If you want to set up experiments from the section "Know more", you need additional components...
| 1 | Pushbutton Switches |
| 1 | Resistor 1 MΩ (brown, black, green), 1/4W |
| 1 | C-MOS IC4072 DIP (2 OR gates with 4 inputs) |
| 1 | C-MOS IC4073 DIP (3 AND gates with 3 inputs) |
| 1 | C-MOS IC4075 DIP (3 OR gates with 3 inputs) |
| 1 | C-MOS IC4082 DIP (2 AND gates with 4 inputs) |
